ARTISCAN for Radiology

The management of machine quality in radiology ensures the safe and accurate operation of equipment. These crucial procedures are essential for the reliability and effectiveness of diagnostic interventions for patients, thus ensuring quality care.

Tomodensitometry

To meet the quality control requirements for your CT scanner, we offer the Full CT QA Pack.

 

For this pack, we follow these recommendations:

  • Decision of March 11, 2011, amending the decision of November 22, 2007, specifying the modalities of quality control for CT scanners.

 

1. Modules for automatic analysis of DICOM images acquired with various image quality test objects.
   Measured parameters:

   - Signal/Noise, Noise, Homogeneity
   - Thickness, Position, Incrementation, and profile of the cut
   - HU Linearity
   - Low and high contrast resolution
   - Deformation, Spatial resolution

2. Module for analysis in accordance with the requirements of the Decision of March 11, 2011, amending the Decision of November 22, 2007, setting the modalities for the quality control of CT scanners:

   - Analysis of images from all water phantoms provided by manufacturers
   - Management of dosimetric data and internal QC parameters

3. Modules for automatic analysis of DICOM images acquired with various test objects dedicated to density control.
   Measured parameters:

  - For each insert in the phantom, the software determines and saves different representative values that allow assessing the relationship between the density of a material and its Hounsfield level.

4. AQUILAB CT Laser Phantom for checking the precision of patient positioning along the z-axis.

 

LightSpeed, LightSpeed VCT et Hawkeye GE Healthcare

CT Phantom Siemens Healthcare

System Performance (PMSSPP) Philips Healthcare

CATPHAN® 500, 503, 504, 600, 604, 700 Phantom Laboratory

CT Laser Phantom AQUILAB

062 M & MA CIRS

Gammex RMI® 465 & 467 Gammex RMI

Densité CT

To address the density control of CT scanners, we offer the DENSITY QA Pack

 

Modules for the automatic analysis of DICOM images acquired with various dedicated test objects for density control

For each insert present in the phantom, the software determines and saves various representative values that allow assessing the relationship between the density of a material and its Hounsfield level.

062 M & MA CIRS

465 & 467 Gammex RMI

Magnetic Resonance

To meet the Quality Control needs of MRI imagers, we offer the MR QA Pack.

 

For this pack, we follow these recommendations:

  • ACR MRI Accreditation Program

  • Signal-to-Noise Ratio,
  • Noise Uniformity
  • Ghosting
  • Geometric Distortion
  • Spatial Linearity
  • Pixel Size
  • Contrast Scale
  • Slice Position
  • Slice Thickness
  • High Contrast and Low Contrast Resolution

MAGPHAN® SMR 170 Phantom Laboratory

Basic MRI Spin Safety

MRI DLX1/DLXP Data Spectrum

DQA3 GE

Performance 200mm Philips

ACR MRI Phantom

Radiography

To meet the Quality Control needs for radiological images, we offer the RADIO QA Pack.

 

Supported DICOM modalities: CR (Computed Radiography), DX (Digital Radiography), RF (Fluoroscopy), XA (X-ray Angiography)

Enables the calculation and monitoring of 5 groups of parameters:Le centrage

  • Centring
  • Brightness and contrast
  • Geometric distortion
  • Contrast resolution
  • Spatial resolution

Tor 18 FG Leeds Test Objects

Digi 13 IBA

Normi 13 PTW